General procedure for connecting the Solar-Log 200 and/or 300 to a laptop or PC. The following link provides you with detailed instructions on how to enable DHCP on your PC in order to connect to the Solar-Log™ with a crossover network cable to be able to configure it.
What do you need to know to make effective use of performance monitoring? The following link provides you a document that explains performance monitoring with an example.
When, for example, 105 kW or more is connected to a Solar-Log™ 1200, exceeding its limit of 100.99 kW. The following occurs: FTP Export is disabled (Remote Configuration still works). HTTP Export is disabled (Remote Configuration still works). The sending of error and yield notifications is disabled. The following message appears in the web interface: "The amount of connected generator power allowed for this device has been exceeded. The device's use is limited. Please check the device configuration."
The link provides you with a checklist to help you successfully set up GPRS. The checklist also contains all of the error codes up to now and a list of APNs from major providers.
Would you like to set up WiFi for your data logger or receive error messages that are not clear? The WiFi checklist contains tips for setting up WiFi and a list of possible error messages.